[单选]
You are preparing to install Windows 2000 Professional on 100 MPS-compliant computers. Each computer has two 550-MHz processors. The Computers are configured identically. You want to use one of the computers as a reference computer for deploying Windows 2000 Professional to the remaining Computers.
You install Windows 2000 Professional on the reference computer. You view Device Manager and notice that the drivers for the second processor are not installed. You want to add support for the second processor on the remaining 99 computers. You want to accomplish this with the least amount of administrative effort.
What should you do? （）

A . Use Setup Manager to configure the reference computer, and then create a disk image.
B . Use the System Preparation Tool with the -pnp parameter to set up the reference disk, and then create a disk image.
C . Use Device Manager to add the appropriate hardware abstraction layer (HAL) to the reference computer to support the second processor, and then Create a disk image.
D . After imaging the reference computer, restart the reference computer in safe mode and add the driver for the second processor.

为了满足不同用户对煤气压力热值的不同需要，故在企业中设立（）。煤气柜或燃烧放散塔。煤气加压站和混合站。电除尘器和脱硫装置。未熔合 You are a network administrator for your company. You install Windows Server 2003 on two servers named Server1 and Server2. You configure Server1 and Server2 as a two-node cluster. You configure a custom application on the cluster by using the Generic Application resource， and you put all resources in the Application group. You test the cluster and verify that it fails over properly and that you can move the Applications group from one node to the other and back again. The application and the cluster run successfully for several weeks. Users then report that they cannot access the application. You investigate and discover that Server1 and Server2 are running but the Application group is in a failed state. You restart the Cluster service and attempt to bring the Application group online on Server1. The Application group fails. You discover that Server1 fails， restarts automatically， and fails again soon after restarting. Server1 continues to fail and restart until the Application group reports that it is in a failed state and stops attempting to bring itself back online. You need to configure the Application group to remain on Server2 while you research the problem on Server1. What should you do？（） On Server2， configure the failover threshold to 0.。 On Server2， configure the failover period to 0.。 Remove Server1 from the Possible owners list.。 Remove Server1 from the Preferred owners list.。对于如何打开文件浏览器描述不正确的是（）文件菜单>浏览。选项栏>切换文件浏览器。按Shift键并双击界面灰色区域。按快捷键Ctrl+Shift+N。如果退休年龄按65岁计算，将职业生涯分为六个阶段，那么18到30岁是（）。职业生涯准备期。职让生涯稳宝期。取业生涯选择期。职业生涯适应期。

You are preparing to install Windows 2000 Professional on 100 MPS-compliant computers. Each computer has two 550-MHz processors. The Computers are configured identically. You want to use one of the computers as a reference computer for deploying Windows 2000 Professional to the remaining Computers.
You install Windows 2000 Professional on the reference computer. You view Device Manager and notice that the drivers for the second processor are not installed. You want to add support for the second processor on the remaining 99 computers. You want to accomplish this with the least amount of administrative effort.
What should you do? （）

参考答案：

● 参考解析

When upgrading from a single processor system to a multiprocessor system the Hardware Abstraction Layer （HAL） must be upgraded. To do this， open Computer Management in Administrative Tools， open Device Manager， Expand Computer， Right-click Advanced Configuration and Power Interface （ACPI） PC （or similar）， select Properties， select the Driver tab， and select Update Driver. This will start the Upgrade Device Driver Wizard that can be used to update the HAL.

当前位置：MCP(70-210)题库

相关题目: