Which of the following is the correct format for /etc/inittab entries（） Runlevel：Action：Identifier：Command。 Identifier：Runlevel：Action：Command。 Command：Action：Identifier：Process。 Process：Runlevel：Command：Identifier。
During the process of fallover testing， a client/server database needs to be tested. On the AIX Server， start/stop/cleanup scripts and server application functionality have been tested. Before moving onto the next step of fallover testing，what action must be completed？（） Run who -a and validate that client connections are restored.。 Verify that the client side application is functioning properly.。 Check hacmp.out log file to validate that the application server started.。 Verify that the application will successfully stop and restart on the fallover node.。
A System p administrator is currently working on a problem with IBM Support. The administrator feels that their expectations are not being met on this problem. What is the IBM recommended procedure to ensure that the request is handled appropriately （） Request to change the severity to 1.。 Request to speak to the Duty Manager.。 Request to escalate the problem to development.。 Call IBM Support again and restart the proce。
背景：某大学城工程，包括结构形式与建筑规模一致的四栋单体建筑，每栋建筑面积为21000m2，地下2层，地上18层，层高4.2m，钢筋混凝土框架一剪力墙结构。A施工单位与建设单位签订了施工总承包合同。合同约定：除主体结构外的其他分部分项工程施工，总承包单位可以自行依法分包；建设单位负责供应油漆等部分材料。合同履行过程中，发生了下列事件：
事件一：A施工单位拟对四栋单体建筑的某分项工程组织流水施工，其流水施工参数如下表所示： 其中：施工顺序I、Ⅱ、Ⅲ；施工过程Ⅱ与施工过程Ⅲ之间存在工艺间隔时间1周。
事件二：由于工期较紧，A施工单位将其中两栋单体建筑的室内精装修和幕墙工程分包给具备相应资质的B施工单位。B施工单位经A施工单位同意后，将其承包范围内的幕墙工程分包给具备相应资质的C施工单位组织施工，油漆劳务作业分包给具备相应资质的D施工单位组织施工。
事件三：油漆作业完成后，发现油漆成膜存在质量问题，经鉴定，原因是油漆材质不合格。B施工单位就由此造成的返工损失向A施工单位提出索赔。A施工单位以油漆属建设单位供应为由，认为B施工单位应直接向建设单位提出索赔。B施工单位直接向建设单位提出索赔。建设单位认为油漆在进场时已由A施工单位进行了质量检验并办理接收手续，其对油漆材料的质量责任已经完成，因油漆不合格而返工的损失由A施工单位承担，建设单位拒绝受理索赔。
分别指出事件三中的错误之处，并说明理由。
When choosing a hostname， which of the following naming conventions is most important to consider？（） The name is unique globally。 The name is unique in a specified domain。 The name is not named after a person， place or thing。 The name has special meaning to the machine’s functio。
A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated. The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage. Each system has the following：
？ 2 integrated network ports ？
2 fibre channel adapter cards
？ 1 power supply and redundant cooling
？ HACMP v5.1
In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）
