A customer had been given a proposal for a p5-570 6-way 32GB system running in Full Partition mode. After review， the customer asked that the configuration be modified to enhance the reliability and availability of the solution. However， the customer does not want to pay for HACMP or additional machines. What change would be most likely to improve the reliability of the solution？（） Add CUoD memory.。 Provide CUoD processors.。 Provide redundant disks on separate SCSI buses.。 Add redundant power supplies in the p5-570 CEC （Central Electronics Complex）.。
弥散性血管内凝血，其出血主要特征是（） 皮肤瘀斑。 广泛粘膜出血。 肌肉血肿。 常出血不止。
Company.com is migrating from a third party managed disk subsystem to an IBM TotalStorage Enterprise Storage Server. Connection of the new storage server is complete， and it has been tested on all of the nodes in the three node HACMP cluster. How does the customer migrate to the new storage server with minimum down time？（） Shut down one node at a time and let the other node serve the application。 Stop HACMP with the forced option and perform migration of the disks on one node，then restart HACMP。 Stop both nodes and perform the migration all at once using standard AIX commands in parallel， then restart the cluster。 Use C-SPOC to add the new disks to the cluster and migrate the information off the existing disks， then remove the old disks with C-SPOC。
A customer has ordered a rack， a p650， two p630s， and two p615s. During a conversation on installation planning， the pSeries technical specialist recognizes that the customer expects the rack to arrive as one unit. However， the specialist knows that the p650 will be racked， but the other systems will arrive separately. In fact， the other systems are CSU （Customer Set Up）. Why should the specialist immediately inform the customer that additional racking is the customer’s responsibility？（） Because additional systems would require more power receptacles。 Because the customer may need to do additional facilities planning。 Because the customer needs additional funding to cover the services。 Because postponing the eventual discussion will likely lead to customer dissatisfactio。
根据美国斯坦福大学整合设施工程中心（CIFE）对BIM项目的调研，使用建筑信息模型的优势，错误的有（）。 A.消除50%的预算外更改 。 B.造价估算耗费的时间缩短80% 。 C.通过发现和解决冲突，将合同价格降至10% 。 D.项目实现缩短7%。
Where can the perfagent.tools fileset be found？（）
