[单选]

Using the C-SPOC utilities， an administrator has created a new volume group and filesytems. Theadministrator performs an Isvg -I command on the volume group and notices that the log logical volume created in C-SPOC is closed/syncd and loglv01 has been created and is in use. 
What step was required in order for the logfile created by C-SPOC to be used.（）  

A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（） All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.。 There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.。 The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.。 The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.。 104型电空制动机充气阀连接的是制动管与（）的通路。 工作风缸。 副风缸。 缓解风缸。 总风缸。 Which environment variable must be changed in auser’s profile so that upon login，the command prompt identifies the server？（） PMT。 PS1。 PRT。 PT1。 In order to increase reliability， minimize collisions and establish a large number of systems on an Ethernet segment， which of the following options should be selected for the Ethernet network？（） 10BaseT。 Switched 10BaseT。 Switched 100BaseT Half-Duplex。 Switched 100BaseT Full-Duplex。 红细胞衰老时，下列何项是错的（） 各种酶活动减少。 ATP增加。 脂质减少。 Na↑<+>K↑<+>增多。

Using the C-SPOC utilities， an administrator has created a new volume group and filesytems. Theadministrator performs an Isvg -I command on the volume group and notices that the log logical volume created in C-SPOC is closed/syncd and loglv01 has been created and is in use. 
What step was required in order for the logfile created by C-SPOC to be used.（）