View the Exhibit to examine the error while executing the REPAIR FAILURE command in an RMAN session.What is the reason for this error?（） Another repair session is running concurrently.。 The failure ID has not been mentioned in the command for data file 5.。 There are new failures recorded in the Automatic Diagnostic Repository (ADR).。 The ADVISE FAILURE command has not been issued before the REPAIR FAILURE command.。
开磨外圆柱表面时，当研磨表面上形成45。交叉网纹时，说明研磨环的往复运动速度适当。
按GB7588-2003《电梯制造与安装安全规范》规定，不论钢丝绳股数多少，曳引轮或滑轮或卷筒的节圆直径与悬挂绳的公称直径之比应不（）。 大于30。 小于40。 小于30。 大于40。
Companycom has a 16 way 1.65 GHz p5 590 and wants to install a i5/OS partition on their server. The customer wants to keep installation costs to a minimum by sharing devices between all LPARs. Before the operating system can be installed in this partition, the customer was told that there are certain limitations that must be observed. What are these limitations?（） When the i5/OS partition is housed in the p5 590, the HMC allows seamless installation in a partition as long as the minimum one processor, 256 MB of memory, one Ethernet and one boot adapter/disk is available from internal hardware. 。 V5R3 and later releases of i5/OS can be installed on a POWER5 server partition. Only one processor can be assigned to the i5/OS. A special expansion tower must be ordered. This expansion tower and its devices can be shared with other OS partitions. 。 When the i5/OS partition is housed in the p5 590, the 5250 Twinaxial console must be used to set up the partition. Only one processor can be assigned to the i5/OS partition. A special expansion tower must be ordered to house the IOPs. Devices in the special expansion tower can be shared with other Linux partitions. 。 V5R3 and later releases of i5/OS can be installed on IBM eServer p5 servers. i5/OS can run on two processors in the p5 590. A special expansion tower must be ordered. This expansion tower and its devices cannot be shared with other OS partitions. The iSeries expansion towers are seen by the IBM eServer p5 server as an I/O subsystem.。
资产评估的经济原则（）。 贡献原则。 预期原则。 替代原则。 公开市场原则。
（）就是要依据企业现存或采购的材料尺寸规格对零件的材料下料进行优化，以期提高材料利用率
