问题:
R1 in ASN 1 with loopback1 address 1.1.1.1 needs to be configured with an iBGP connection to R2 with loopback2 IP address 2.2.2.2. The connection should use the loopbacks.
Which o f the following commands is required on R1?()
A . neighbor 1.1.1.1 remote- as 1
B . neighbor 2.2.2.2 remote- as 2
C . neighbor 2.2.2.2 update - source loopback1
D . neighbor 2.2.2.2 ibgp -multihop 2
E . neighbor 2.2.2.2 ibgp - mode
R1 in ASN 1 with loopback1 address 1.1.1.1 needs to be configured with an iBGP connection to R2 with loopback2 IP address 2.2.2.2. The connection should use the loopbacks.
Which o f the following commands is required on R1?()
● 参考解析
本题暂无解析