试论班图拉等的道德社会学习理论。
Your company has an Active Directory domain. The company runs Terminal Services. A user has remotely logged on to the Terminal Server. The user requires help to use an application. When you connect to the Terminal Server session， you cannot operate any applications. You need to ensure that you can assist any user on the Terminal Server. What should you do？（） From the Terminal Server run the Tscon /v command. Then reconnect to the session.。 Run the Chgusr /execute command on the Terminal Server. Then reconnect to the session.。 Enable Use remote control with default user settings in the RDP-Tcp Properties.。 Enable Use remote control with the following settings in the RDP-Tcp Properties. Configure the Level of control policy setting to Interact with the session. Instruct the user to log off and log back on.。
某施工总承包单位承担一项建筑基坑工程的施工，基坑开挖深度12m，基坑南侧距基坑边6m处有一栋6层既有住宅楼。其中：基坑工程为专业分包工程。在施工过程中，发生了如下事件：
事件一：为宣传企业形象，总承包单位在现场办公室前空旷场地树立了悬挂企业旗帜的旗杆，旗杆与基座预埋件焊接连接。
事件二：为确保施工安全，总承包单位委派一名经验丰富的同志到项目担任安全总监。项目经理部建立了施工安全管理机构，设置了以安全总监为第一责任人的项目安全管理领导小组。在工程开工前，安全总监向项目有关人员进行了安全技术交底。基坑专业分包单位进场后，编制了相应的施工安全技术措施，报批完毕后交项目经理部安全部门备案。
事件三：施工总承包单位督促专业分包单位针对深基坑组织编制了专项施工方案，并指示基坑分包单位组织了专家论证，定稿后由总承包单位项目总工、总监理工程师签批后组织实施。
事件四：基坑在开挖过程中，总承包单位按照《建筑施工安全检查标准》JGJ59～2011的要求对深基坑支护安全进行检查，重点检查保证项目，并形成书面检查记录。
事件三中，深基坑专项施工方案编制、签批、专家论证是否妥当？分别说明理由。
简述硬绷带优缺点。
You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.the Company.com contains an exchange server 2010 server named -ex10 that has imap4 installed.The users of .com use imap4 via the internet to connect to -ex10.you have received instructions from the cio to make sure that the can use -ex10 to connect to the internet.What should you do？（） you should consider running the test-imapconnectivity cmdlet from -ex10.。 You should consider using Telnet to connect to TCP port 587 from a client computer.。 You should consider using Telnet to connect to TCP port 143 from a client computer.。 you should consider running the test-outlookconnectivity cmdlet from -ex10.。
You have a 10Mbps network card in your computer. You install a 100Mbps network card on your computer and restart the computer. The 100Mbps card in not working due to a conflict with the10Mbps card. You want only the 100Mbps card to be active. What should you do to disable the10 Mbps network adapter？（）
