An administrator needs to recover an HMC due to a failed disk. The disk has been replaced, allowing the administrator to reinstall the HMC back to the required release of software. Backups of both the HMC Console Data and Upgrade Data are available. After reloading the HMC with the Recovery DVDs, what are the next steps to restore the HMC configuration?（） Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC Data..。 Use the 'HMC Management > Restore Upgrade Data' option to first restore just the Upgrade Data.。 Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data and then the Upgrade Data.。 Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade Data, and then the HMC Data.。
赵某一直对孙某有好感，但孙某生性孤傲，不愿理睬赵某。赵某心里一直很伤心。一天晚上，赵某看到孙某一个人走在路上，遂过去搭讪，但是孙某并不理会。赵某很生气，将孙某按倒在地实施了奸淫行为。事后，赵某十分后悔，而孙某又大喊要报警将其抓起来。赵某十分害怕，用手将孙某掐死。在本案中，赵某的行为（）。 构成故意杀人罪。 构成强奸罪。 按照故意杀人罪和强奸罪数罪并罚。 以强奸罪从重处罚。
Company.com with an EtherChannel implementation is considering an HACMP solution. What considerations must be addressed in planning this configuration？（） Hardware address takeover must be configured.。 IPAT via IP aliasing is required for EtherChannel.。 EtherChannel must be defined as a separate network.。 HACMP does not support the fallover of EtherChannel.。
施工中进行工程计量，当发现招标工程量清单中出现缺项、工程量偏差，或因工程变更引起工程量增减时，应如何处理（）。 A.应按承包人在履行合同义务中完成的工程量计算 。 B.应按招标文件规定的的工程量计算 。 C.应按投标文件承诺的工程量计算 。 D.应由造价咨询人重新进行工程量清单的编制。
You are using the flash recovery area (fast recovery area in 11g Release 2) to store backup related files in your database. After regular monitoring of space usage in the Mash recovery area. You realize that the flash recovery area is jetting filled up very fast and it is running out of space. Your database flash recovery area is low on space and you have no more room on disk. Proactively, which two options could you use to make more space available in the flash recovery？（） Change the RMAN archived log deletion policy。 Use the RMAN CROSSCHECK command to reclaim the archived log space。 Change the RMAN retention policy to retain backups for a shorter period of time。 Use OS command to move files from the flash recovery area to some other locatio。
Which of the following commands should be used to open a tty port configured in the /etc/uucp/Devices file as：
Direct tty2 - 9600 direct
in debug mode， ignoring modem control signal data carrier detect （DCD）？（）
