[单选]
You are the administrator of your company's network. The network is configured as shown in the exhibit.

You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server. You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.
What should you do?（）

A . Add a computer running DHCP Relay Agent to the marketing segment.
B . Add a computer running the network monitor driver to the marketing segment.
C . Move the Windows 2000 Server computer running WINS to the marketing segment.
D . Move the Windows 2000 Server computer running Active Directory to the marketing segment.

简述公司分配的顺序。 All servers on your network run Windows Server 2008 R2. You plan to configure multiple highly available virtual machines （HAVMs） on a Hyper-V failover cluster. You need to recommend a storage solution that supports high availability. Which storage solution should you recommend？（） a direct-attached storage （DAS） device。 a multipath serial-attached SCSI drive with a witness disk。 a multipath Fibre Channel logical unit number （LUN） with a witness disk。 a multipath iSCSI logical unit number （LUN） with Cluster Shared Volumes （CSVs）。党内监督的重点是（）。党的各级领导机关。党的领导机关和领导干部。党的基层组织。党组织的所有党员。一次烟气 “财富最大化”就是指“股东财富最大化”。

You are the administrator of your company's network. The network is configured as shown in the exhibit.

You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server. You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.
What should you do?（）

参考答案：

● 参考解析

RIS requires DNS, DHCP, and Active Directory. These services are all present according to the exhibit. The problem is the router which isn't RFC-1542 compliant, i.e. it is not BOOTP compliant, and therefore the DHCP Server will not be reached from the marketing segment. Thus the computers will not be able to contact the RIS server since RIS clients require DHCP to acquire TCP/IP configuration. By adding a DHCP Relay Agent to the marketing segment the computers will be able to connect to the DHCP server, get their TCP/IP configuration, and connect to the RIS server.

当前位置：MCP(70-210)题库

相关题目: