当前位置:IBM(000-237)题库

问题:

[单选] Company.com has an application that requires a serial connection for Electronic Data  Interchange. What must be done to integrator the serial connection into an HACMP cluster?()

A .  Use an RS3232/422 serial Y cable.
B .  Alter the device settings to 9600 8/n/1 xon/xoff.
C .  Use a network based terminal server for the serial connection.
D .  Nothing because HACMP does not support native serial connection fallovers.

Company.com has a new computer room that will be used to house a new HACMP cluster. Onceof the outstanding features of the new computer room was the new large air conditioner. This unit has enough excess capacity for more than double the planned amount of equipment. Another feature of this computer room was the dual electric supplies to the room housed in two separate power panels.  How would this impact the overall availability of the environment?()  Dual power feeds will make the installation difficult to manage and less high available.。  The single air conditioner is a single point of failure and the customer should be made aware of the issue.。  The single air conditioner is a single point of failure and HACMP should be customized to compensate for the issue.。  A single power feed should be used to avoid ground loops in the computer room causing premature failure of the systems.。 A client needs more disk space for another volume group and has decided to use hdisk12 from the uservg volume group containing hdisk10, hdisk11, and hdisk12 where hdisk10 and hdisk11 have sufficient PPs to contain the volume group data. The client attempted to remove hdisk12 from the volume group but received the following error:  0516-016 Cannot delete physical volume with allocated partitions.  Which of the following commands should be run to correct this problem() reducevg hdisk12。 rmdev -dl hdisk12。 cplv hdisk10 hdisk12。 migratepv hdisk12 hdisk10。 Companycom wants to manage multiple partitions for a p5 590 server using Partition Load Manager (PLM). Some of the partitions are dedicated processors and some of them are shared processors. What information about PLM limitations should be expressed to the customer?()  All of the partitions can be managed in one group mixing dedicated and shared processors. PLM will move resources in the group as setup in the PLM profiles. 。 PLM handles memory, dedicated and shared processor partitions. All the partitions in a group must be of the same processor type. PLM moves I/O resources between partitions based on PLM policy files. 。 PLM handles memory, dedicated and shared processor partitions. The policy file, once loaded, is static and has no knowledge of workload on the managed partitions. PLM is supported for partitions that are running AIX 5.2 or i5OS. 。 All of the partitions in a group must be the same type, either all dedicated processor partitions or shared processor partitions. One PLM Server can manage multiple groups of partitions. PLM does not move resources between groups.。 What is the difference between the CUoD and Utility Capacity On Demand?() Utility allows for activation of resources by the hour. CUoD allows for permanent access to additional resources installed into the system.。 Utility allows for permanent access to additional resources installed into the system. CuOD allows for activation of resources by the hour.。 Utility allows for activation of resources by the minute. CUoD allows for permanent access to additional resources installed into the system.。 Utility allows for a 30 day usage of additional resources installed into the system. CUoD allows for permanent access to additional resources installed into the system.。 A system administrator notices that one of the mirrored disks, hdisk7 on datavg, has had a hardware failure. What is the best method of recover without causing additional problems?() unmirrorvg datavg hdisk7 reducevg datavg hdisk7 replace the physical volume, run cfgmgr extendvg datavg hdisk7 mirrovg datavg hdisk7。 varyoffvg datavg Rmdev -l hdisk7 -d Replace the physical volu,e run cfgmgr The system will automatically remirror when the disk is replaced。 unmirrorvg datavg hdisk7 rmdev -l hdisk7 - d replace the physical volume, run cfgmgr extendvg datavg hdisk7 The system will automatically remirror when the disk is replaced.。 unmirrorvg datavg hdisk7 reducevg data hdisk7 rmdev -l hdisk7 -d replace the physical volume, run cfgmgr extendvg datavg hdisk7 mirrovg datavg。 Company.com has an application that requires a serial connection for Electronic Data  Interchange. What must be done to integrator the serial connection into an HACMP cluster?()
参考答案:

  参考解析

本题暂无解析

相关题目:

在线 客服