在焊条被粘连短路时，焊机电压（）。 A.急剧下降 。 B.缓慢下降 。 C.急剧上升 。 D.缓慢上升。
If a restore from a NIM mksysb install hung on C54, which debug output would be best to investigate the problem?（） export INST_DEBUG =yes。 bosboot -aID -d /dev/ipldevic。 nim - to check -a debug =yes。
D.type 911 at -Welcome to BOS install- menu。
To add a TTY Terminal to Serial port 1， which of the following set of options should be chosen？（） tty rs232 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port。 tty rs422 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port。 tty rs232 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port。 tty rs422 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port。
Error log analysis indicates that a disk is starting to fail and will need to be replaced. The failing disk contains multiple logical volumes which span multiple disks. A free disk has been added to the failing disk’s volume group.Which of the following is the most efficient method to move the data from the failing disk to the new disk？（） Back up the data， remove the failing disk from the volume group， then restore the data to the new disk.。 Use the migratepv command to move data from one disk to another and then remove the failing disk from the volume group.。 Use the mirrorvg command to mirror the data to the new disk， break the mirror and then remove the failing disk from the volume group.。 Create a new filesystem on the new disk and use the mv command to move the data to the new filesystem， and then remove the failing disk from the volume group.。
下列行为中构成伪证罪的有（） 在刑事诉讼中，翻译人对与案件有重要关系的情节，故意作虚假翻译，意图陷害他人或者隐匿罪证的。 在刑事诉讼中，鉴定人对与案件有重要关系的情节，故意作虚假鉴定，意图陷害他人或者隐匿罪证的。 以暴力方法指使他人作伪证的。 明知是犯罪的人而作假证明包庇的。
Companycom wants to reduce the number of copper, Ethernet adapters on their 4 way p5 570 running AIX 5.3 used in each of the four LPARs. Companycom has one database LPAR, two application LPARs, and one web LPAR. Only the Web LPAR needs to communicate with the outside world.
What is the minimum number of Ethernet adapters that should be provided to ensure redundancy and no single point of failure?（）
