当前位置:水利水电专业继续教育题库

问题:

[单选] 在利用直方图进行数据分析时,直方图中的横坐标表示()。

A . A.影响产品质量的各因素
B . B.质量特性值
C . C.不合格产品的频数
D . D.质量特性值出现频数

下列内容,属于货运牵引车、半挂车连接步骤的是()。 检查连接装置是否可靠、有无受损。 调整支腿,使半挂车牵引滑板与牵引座高度相适应。 把牵引车和半挂车上的两个气管接头同色相连。 从半挂车的电缆连接插座上拔下电缆插头并放置到牵引车上。 What is the effect of the following access list condition access-list 101 permit ip 10.25.30.0 0.0.0.255 any()。 permit all packets matching the first three octets of the source address to all destinations。 permit all packets matching the last octet of the destination address and accept all source addresses。 permit all packets from the third subnet of the network address to all destinations。 permit all packets matching the host bits in the source address to all destinations。 permit all packets to destinations matching the first three octets in the destination addre。 临时用电设施,照明设计满足基本照度的规定,不得超过()和() 5;-10%。 6;-10。 5;-20%。 5;10%。 根据下图,Switch1刚刚完成重启,并完成上电自检。HostA发送它的第一个侦到HostC,交换机首先会对switching table做什么操作() Switch1会添加192.168.23.4到switchingtable。 Switch1添加192.168.23.12到switchingtable。 Switch1添加000A 8A47.E612到switchingtable。 Switch1添加000B DB95.2EE9到switchingtable。 首钢采用的烧结工艺是()工艺,冷烧比1:1。 在利用直方图进行数据分析时,直方图中的横坐标表示()。
参考答案:

  参考解析

本题暂无解析

在线 客服